dettagli azienda

  • Hebei Jiebin Wire Mesh Products Co.,Ltd.

  •  [Hebei,China]
  • Attività di tipo:fabbricante
  • I mercati principali: In tutto il mondo
  • esportatore:81% - 90%
  • Karts:ISO9001, CE
Elenco prodotti (0)

Hebei Jiebin Wire Mesh Products Co.,Ltd.

Casa> Blog> How to install a Welded Wire Fence?

How to install a Welded Wire Fence?

August 10, 2018

How to install a Welded Wire Fence?

Hebei Jiebin is a professional Welded Mesh Fence manufacturer since 2005. Our Welded Wire Fence varies from Roll top profiled Security Fence to High security 358 Fence. Welded Wire Mesh Fence with features of high deterrent, durability, beautiful appearance and landscaping. Welded Mesh Fence had became to the most popular type Security Fence recently years.


Then how to install a Welded Wire Fence?

Step 1:  Mark the corner and end post locations for your Weld Mesh Fence with powder coated or zinc coating. Dig a 2- to 3-foot deep hole at the first corner post site with is a clam shell post-hole digger. Insert the bottom of one of your steel or wooden posts into the post hole. Check with a level to ensure that the post stands straight in the hole then tamp the loose dirt around the base of the post with a tamping rod. Repeat this process for each corner and end post in your Wire Mesh Fence.


Step 2: Run a taut marking string between the corner and end posts to mark the line of your Wire Mesh Fencing. Sink steel T-posts into the ground along the outside edge of the marking string for line posts. Use a handheld post driver to drive the line posts 12 to 16 inches into the ground. Position the line posts 8 feet apart for maximum fence strength.


Step 3: Unroll the Welded Wire Mesh on the ground along the inside of your fence line. Position the beginning end of the Welded Wire Mesh against the side of the first corner post. Make sure the bottom edge of the Galvanized Welded Wire Mesh or Welded Mesh Fence Panels is about 1 inch above the ground before you secure the end of the length of fence to the first corner post. Use a 1 ½-inch galvanized fence staple every 6 inches along the height of the fencing material.


Step 4: Stand the Welded Wire Mesh fencing or Welded Mesh Fence Panels upright and have a helper pull it taut. Secure the fencing to each steel T-post using wrap-around wire T-post clasps and a pair of pliers. Start with the nearest T-post and work your way down the first straight stretch of fence. When you come to the next corner post, attach the fencing with galvanized staples. Repeat this process with each straight stretch of fence.


Finally, you will see your esteemed job and a beautiful perimeter Fencing! 


Contattaci

Author:

Ms. Jolin Jie

Phone/WhatsApp:

+8615030831097

Prodotti popolari
You may also like
Related Categories

Mail a questo fornitore

Oggetto:
E-mail:
messaggio:

Your message must be betwwen 20-8000 characters

Contattaci

Author:

Ms. Jolin Jie

Phone/WhatsApp:

+8615030831097

Prodotti popolari
Comunicare con Fornitore?Fornitore
Jolin Jie Ms. Jolin Jie
Cosa posso fare per te?
Contattare il Fornitore